The DigiBoil with Mash Upgrade Kit represents one of the best values in electric all-grain brewing you'll find. This kit includes all of the necessary equipment to mash and boil all in one unit. Simply place the false bottom inside the kettle and install the malt pipe, fill with water and heat to your desired strike temperature, then add your grain and set your desired mash tempearture on the digital controller. Once your mash is complete, lift up the malt pipe, drain the wort and sparge, then remove the malt pipe and proceed to boil. This DigiBoil model has three built-in heating elements that run off a 220V plug.
The elements are 2000w, 1000w and 500w for a combined 3500 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage all three elements to quickly go from steeping temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s). Integrated stainless ball valve comes with a 13mm barb approx.
The barb can be removed to attach 1/2 FPT fittings if desired. NEMA 6-30R plug 4.5 ft. Triple heating element control (2000w, 1000w and 500w). Heating elements are concealed for easy cleaning. 304 stainless steel 1/2 ball valve with 13mm barb approx.Stamped-in volume markers (gallons & liters). Temperature reads in °F or °C. With elements turned off, hold both the +/- buttons to switch between °F or °C. External Dimensions: 29" H x 19.5" W (including handles). Internal Dimensions: 20.25" H x 15.75" W.
The item "DigiBoil Electric Kettle with Mash Upgrade Kit 65L/17gal (220V) All Grain Beer" is in sale since Thursday, September 26, 2019. This item is in the category "Home & Garden\Kitchen, Dining & Bar\Brewing, Distilling & Wine Making\Equipment".
The seller is "lionbrewingsolutions" and is located in Lansing, Michigan. This item can be shipped worldwide.